There is also a Tyco connection system used on sunroof Modules as well as other small modules. This connection system also uses a square type .64 terminal 1123343-2 in the Lear tray 7. There are several styles of this connector in use with different terminals. You must carefully lift the white TPA on the top of the connector (do not remove this TPA actually surrounds the terminal so, you will damage it if you try to get it completely out). Use the green J-38125-24 terminal release tool, inserting it next to the terminal you wish to remove and lift the plastic tang that holds the terminal. Once the new terminal has been pushed back into position the white TPA must be pressed back into place.