The Tyco connection system used on the GMT 560 ABS Module.
This connection system uses a square type .64 terminal 962885-5 in the Yazaki
tray 15. There is only one style of this connector in use so far. Use a small
screwdriver to move the two tabs of the blue TPA (next to the terminal area),
out slightly to the preset position. Use the green 12094429 terminal release
tool, inserting it into the small rectangular hole next to the terminal you wish
to remove, moving the plastic tang that holds the terminal. Once the new
terminal has been pushed back into position the blue TPA must be moved back into
place.