The Delphi connectors (the picture is of one used on an ABS
Module which is a hybrid type meaning other than .64 terminals
are used in the same connector), of which there are many
different connector shapes and uses. All Delphi .64
connection systems use terminal 15359541 in the Delphi
tray 4. These connectors require the careful removal of the "comb style"
TPA (these will break very easy if extreme care is not used). Then use
the 15381651-2 terminal release tool pushed into the small hole just between
two terminal cavities. Do not disassemble the connector body any more
than removing the TPA or it is very difficult to get all the terminals back
into place.